Mikuni TMX36 with repair kit
Beiträge von LOpp
-
-
Cagiva Mito bridges & NSR axis
-
Hello everyone, I'm here again. Finally, I went to university and now I can continue to work on the project.
Wheels painted in white, here are some photos.
I5StIiYTchI.jpgEml2pisAWi0.jpg
Continue -
Great project, i'm looking forward to read more about your Nsr
I have a wish to you could you weigh the Wössner piston and post it here? A few weeks ago we had a discussion if the Wössner is more heavy than a original piston or not. At the moment we only know that the weight of the original piston is exactly the same as from a Vertex.
Best regards
The difference in weight of the pistons.
-
Der 4 Kolben Sattel der Mito etc ist schon eine wesentliche Verbesserung. Natürlich kann man auch radiale oder sogar 6 Kolben verbauen.
Aber das wäre wirklich übertrieben.Gesendet von meinem SM-G900F
+eine sehr gute Idee. Mein Thema wird so ähnlich sein. Vorderradaufhängung von Aprilia RS 125 + Bremse Cagiva Mito 125.
Ich entschuldige mich für die Fehler. -
Updated video.
I will try to go this season. We are currently working on the rear suspension. -
-
Hey there! Came the following part of my project:
1) Tail light with integrated turn signals LED from Kawasaki ZX6R / ZX10R 2007-2008
2) Dashboard KOSO RX2N replica
3) Front foot pegs from Honda CBR600RR 2008-2011Spoiler anzeigen
Will soon begin work on the implementation of the rear suspension. -
Great project, i'm looking forward to read more about your Nsr
I have a wish to you could you weigh the Wössner piston and post it here? A few weeks ago we had a discussion if the Wössner is more heavy than a original piston or not. At the moment we only know that the weight of the original piston is exactly the same as from a Vertex.
Best regards
I do not have precise electronic scales to weigh with great accuracy. But my kitchen scale 5-7 grams show the difference between the original and Wossner pistons. In Wossner piston thinner walls and thinner piston pin than the original.
L-DGTVJqqSU.jpgWrDZDlAbnYc.jpg3PYknKoVdXA.jpg -
Nice brake system looks good.
You use the wheels of the Mito ? I think that could be an awesome bike
Yes, the front wheel will be used of the Mito or RS125(I think they are the same). The rear of the NSR.
Where did you get the front break cylinder and levers?
I could need some for my Mito
thanksI bought a front brake master cylinder and levers on the shares for 26$
http://ru.aliexpress.com/item/Black-Uni…ommendVersion=1
If this is the front brake master cylinder will be missed, in the future I would like to put a radial front brake master cylinder. -
Today delivered a parcel:
Front caliper and front brake disc Cagiva Mito 125 (2005)
Piston Wossner
RAZ6mM_vSNw.jpgQy5oRhj5JEU.jpg
-
I will try as much as possible to spread more photos and information.
The cylinder is not made in full, there is not much work to transfers ports.
My tools for cylinder portings:Spoiler anzeigen
Vforce3 reed(its revision) and stock reed: -
Sie da! Ich bin aus Belarus, so schreiben können Fehler sein.
Wenn von einem Moderator genehmigt, werde ich auf Englisch zu formulieren, wird klarer.Inspired photograph found on the Internet:
[Blockierte Grafik: http://cs622627.vk.me/v622627964/ac98/PYCBrikCALo.jpg]
The project began in 2013 with the purchase of wheels
Bike has never plant and did not go.Most interestingly, the engine:
- Сylinder sleeving, portingSpoiler anzeigen
some photos
[Blockierte Grafik: http://cs623125.vk.me/v623125964/1b1cb/x80It1Y_qcw.jpg]
[Blockierte Grafik: http://cs623125.vk.me/v623125964/1b1d5/btLtwTUL_qw.jpg]
[Blockierte Grafik: http://cs625226.vk.me/v625226763/18f69/QL4i7QejqQ8.jpg]
- Vforce3 reed
- Piston Wossner
- Handmade manifold for Keihin PWK33 and Vforce3 reedSpoiler anzeigen
- Handmade exhaust system (under construction)
- CI572 and TV124(unlocked)
- Сarburetor Keihin PWK33 (plans, permitting money)
- EGT sensor for exhaust (exhaust temperature)(plans)
The calculations over 30+ hpСhassis:
- Rear wheel NSR
- Front wheel Aprilia RS125
- Front tires Sava MC50 M-Racer 110/70-17
- Rear tires Shinko R010 150/60-17
IMAG1443.jpg
- Chain Unibear X-Ring, sprockets JT 14-38Suspension:
- Front suspension Aprilia AF1 125 Futura
- Front suspension Cagiva Mito 125 (2006)
Bs8-QsLwlT8.jpg
- Rear suspension with shock absorber Yamaha YZF R125 (2011)
IMAG1238.jpgBrake system:
- Front caliper and front brake disc Cagiva Mito 125 (2005)
- Rear caliper and rear brake disc NSR
- Front brake cylinder and clutch lever
IMAG1317.jpgHeadlight, speedometer/tachometer etc.
- Headlight replica KTM and LED turn signals
IMAG1545.jpg
- Seats Cagiva Mito 125
- Rear brake light Kawasaki ZX6R with intagrated turn signals (2008)
- Dashboard replica KOSO RX2NI will add information as possible. Last time looked like this:
IMAG1266.jpg